Meters / Measurement

By juni 29, 2016 mei 31st, 2018 Blog, Meters & Measurement

7 9 – 2017

Looking for Sperryn Gas Controls and Sperryn Industrial and Commercial Meter kits?

Variousmodels are on stock. Please contact ITT Controls via contact@ittcontrols.com

G940/G941- Domestic Meter Regulator, G1000M – Non – Domestic Meter Regulators, G1000CCompact & G1000 – Industrial Regulators, G5000 – Medium Pressure Regulator,G1100 – Zero Regulator & G1200 Proportionator, R1000 – Relief Valve, L1000- Low Pressure Cut Off, Pits – G5000 Regulator with OPSO, Kiosks – G5000Regulator with OPSO

U16 METER KIT Part No. M916,U65-2″ SERVICE METER KIT Part No.M965-50, U65-3″ SERVICE METER KIT Part No. M965-80, U25 METER KITPart No. M925, U40 METER KIT Part No. M940, U100 METER KIT Part No. M9100,U160-80mm METER KIT Part No. M9160, Sperryn DKW 32C Meter Kit, Sperryn M9100-PMeter Kit, Sperryn DWK66 Kit, Sperryn DKW14 Meter Kit, Sperryn DKW47, SperrynDKW59, Sperryn DKW 31A, Sperryn DKW 24, Sperryn DKW 34C, Sperryn DKW 22-C,Sperryn DKW23 Meter Kit, Sperryn DKW22 Standard Installation Kit, SperrynDKW24-C Installation Kit, Sperryn Firesafe ECV, Sperryn DKW 43A Meter Kit.

More information on our website: https://www.ittcontrols.com/brands/sperryn/

Read more 10 4 – 2016

Actaris Gas Meters and Modules

Actaris Metering Systems is active in residential metering, commercial and industrial metering. These have not only the standard metering systems, but also the smart meters for extended use. With meters of Actaris Metering Systems it is also possible to read the meters remotely and is smart payment an option.

Various models of Actaris Gas Meters and Modules are:

Residential
Actaris ACDG1.6
Actaris Gallus
Actaris Metris
Actaris RF1
Actaris U6 , U16 and SC6
Actaris Atreva
Actaris C -series
Actaris e-series
Actaris RF1 sVZB
Actaris GallussV G
Actaris RF1 sV G

Commercial and industrial
Actaris Dattus
Actaris A-series
Actaris ACD G10 – G16 , G25 – G100
Actaris U -series Chart Meters
Actaris Delta Rotary Meter
Actaris FLUXI 2000/TZ Turbine meters
Actaris MZ Quantometer
Actaris Sparklog
Actaris C -Series
Actaris e-series
Actaris Corus
Actaris Focus
Actaris Alis 200
Actaris ISB +
Actaris Wincor
Actaris Winlog GPRS

Actaris Metering Systems Communication Modules
Actaris AnyQuest Cyble Enhanced
Actaris EverBlu Cyble Enhanced
Actaris Unigate
Actaris Cyble SC
Actaris Cyble Sensor
Actaris Cyble Sensor ATEX
Actaris Gallus i V PSC
Actaris RF1 i V PSC Read more 10 4 – 2016

Actaris Meter Data Management

Besides Data Management software Actaris Metering Systems provide the tools to collect and analyse the data. The software can give you an energy forecasting and can process this for customer care and billing.

Meter Data Management

Actaris Enterprise Meter Data Management
Actaris MV-90 xi
Read more 25 3 – 2016

ITT Turbine Meter Preamplifier Model 818A and 818EU

Model 818A Preamplifier

The Turbine Meter Preamplifier Model 818A converts a low-level signal from the turbine meter pickup coils to square wave signals which are suitable for transmission. Transmissions Up to 3 miles (5 km) for current output and 100 ft (30 m) for voltage output are no problem for the 818A Preamplifier. The output is field selectable – for compatibility with various readout devices. Hazardous location explosion-proof condulet connects to the turbine meter coil boss.

Model 818EU Preamplifier (Cenelec Approved)

The Turbine Meter Preamplifier Model 818EU converts low-level turbine meter pickup coil signals to square wave signals suitable for transmission up to 3 miles (5 km) for current output signals and up to 328 ft (100 m) for voltage output signals. The output is field selectable for either current or voltage – for compatibility with a wide variety of readout devices. The 818EU mounts directly to the turbine meter coil boss.

Read more 30 10 – 2015

Instruments 202E

The Instruments 202E is a chart recorder that is used in gas transmission and distribution fields. It is an 12-inch accurate calibration unit that even works under extreme variations in static pressure and ambient
temperatures.

The Instruments 202E has different configurations. 1 to 4 pen configurations (DP+3 additional pens). The additional pens of this instrument can be used to record temperature and supplemental pressure data.

 

Read more 30 10 – 2015

Instruments Model 335

Model 335A & 338E Recording Controllers


• Pneumatic PID control from any recorded variable
• Dual (pressure limited flow control) controllers in one case (optional)
• Cost effective integrated design
• 3-15 or 6-30 psi output
• Low air consumption
• Actuated by 199 DPU

 

Read more 30 10 – 2015

Instruments J8A Pressure / Temp. Recorder Receiver

Model J8A Pressure / Temperature Recorder Receiver


• Versatile and rugged this unit was designed for general temperature and pressure applications
• Records logged on 8” diameter chart
• Up to four elements or bellowstype receiver elements may be used in any combination to operate up to four inpidual recording pens
• Non-DPU Actuated

Read more 30 10 – 2015

Instruments Model 273, 274A, 284C and 285 DP

Instruments Pneumatic Transmitters and Controllers are designed for petroleum, production, navy shipboard and process plant applications. These devices has to meet the most stringent and demanding requirements.

Model 273 Transmitter – Actuated by 224C DPU
Model 274A Transmitter – Actuated by 199 DPU
Model 284C Transmitter – Actuated by 224C DPU
Model 285 DP Pneumatic Transmitter – Actuated by 199 DPU

General features of Models 273, 274A, 284A and 285 include:

• Rugged, weatherproof, non corrosive case
• Continuous purging (pilot valve and nozzle exhaust inside)
• Operation span continuously adjustable (100 – 20%)
• Adjustable suppression (up to 80% of range)
• Large valve relays (no need for secondary booster)
• Span continuously adjustable (down to 20% of range)
• Air consumption (at balance condition) 0.05scfm ma

Read more 30 10 – 2015

Instruments Model 336 Pneumatic Controller

Model 336C Pneumatic Controller Provides:

• Gain, gain plus integral, gain plus integral and derivative, and differential gap control actions
• Gain control, integral control derivative control, differential gap snap-acting and direct or reverse controller action modes
• Remote set controller and 2-way auto-manual bypass options
• Actuated by 224C DPU

Read more 30 10 – 2015

Instruments Model 752 and 753 Electronic Transmitter

These Instruments transmitters address liquid, gas or vapor service. General features include:

• Liquid-tight, explosion-proof case (no aluminum)
• Any calibrated range, including absolute variations, available as standard with the stated ranges
• Insensitive to normal vibration and show with the best available zero stability
• Zero and space adjustments are easily accessible
• No RFI generation (All DC circuitry)
• Outstanding temperature stability
• Independent, limited interacting range and zero controls

Model 752 Electronic Transmitter

• Standard ranges from 0 – 50 w.c. to 0 – 300 psid
• Addresses static pressures to 3,000 psig on standard models with 6,000 psig on special order
• Can be ordered with zero center or split ranges
• Actuated by 224C DPU

Model 753 Electronic Transmitter

• Couples the reliability of a bourdon tube with the sensitivity of a silicon strain gage
• Delivers .05% accuracy for measurement from 0 – 25 psi to 0 – 5,000 psi

Read more 30 10 – 2015

Instruments 226C Indicator

Model 226C 3-inch Indicator

The Instruments M226C is a DP Indicator that is actuated by ’s M224C rupture-proof DPU.

The indicating pointer travels through a 270° arc over a compact 3-inch (75 mm) dial. Scales are calibrated in uniform increments for measurement of DP or liquid level. Square root  radations are available for direct reading of flow rate and special scales are available for indicating the quantity of fluid in tanks.

Applications

The M226C is used in applications where weight and space are at a premium. Widely used in jet engine and missile testing programs, aircraft ground support equipment, water treatment, and air conditioning systems. It is specified by many liquefied gas producers and distributors for liquid level indication of materials, such as: LOX, CO2, ammonia, nitrogen, helium, hydrogen, and argon.

Read more 30 10 – 2015

Instruments Model 450C Indicator and Model 316C

Model 450C Indicator

The Instruments Model 450C indicates low DP in high static pressure applications. Its 4-1/2″ dial provides excellent readability with economy of space. The M450C is a commercial version of the M316C, used by the U.S. Navy for shipboard measurement of DP, flow, and Liquid level.

• Case: Aluminum (NEMA 4) or 316SST (NEMA 4X), Weather-proof
• Dial: 4-1/2 inch, 270° arc
• Actuated by the 224C DPU Indicating Mechanism

The indicating pointer traverses a 270° arc, providing excellent readability. It is driven by a precision, jeweled rotary movement that employs a thermally stable Ni-Span-C hair spring. The movement has a micrometer screw for range adjustments. Zero and range adjustments
can be made without removing the scaleplate or pointer. Linearity adjustments are easily accessible after removal of the scaleplate.

Scales

The 4-1/2 inch diameter scale can be graduated uniformly for DP or level, or square root for direct reading of flow rate. Special scales for indicating liquid quantity in tanks can be provided.

Read more 30 10 – 2015

Instruments Model 247C and 246C

Model 247C/246C 6-inch DP Indicator/Backflow Tester

The Model 247C is a portable 6” (152 mm) indicator
housed in a plastic carrying case with a built in 3-valve
manifold, bleed valves and neoprene hoses.
• DP ranges from 0-30” w.c. to 0-400 psi
• Portable Backflow Testers available
(Model 246 BFT – 3 inch; Model 247 BFT – 6 inch)
• Actuated by the 224C DPU

Read more 30 10 – 2015

Instruments 232C 6-inch DP Indicator

Model 232C 6-inch DP Indicator

Economical, 6-inch (152mm) indicator designed for applications where high accuracies are not required. Suitable for measurement of tank level, flowrate and DP across filters.

Features include:

• 500 psi (34.5 bar) SWP maximum
• 0-50” w.c. to 0-100 psid (0-124 mbar to 6.9 bar) DP Range
• Case and bezel are 304 SST
• Housing are forged brass with steel and SST optional

Read more 30 10 – 2015

Instruments IT-12 Indicating Transmitter

IT-12 Indicating Transmitter

The Instruments IT-12 DP Indicating Transmitter is designed to be retrofit into existing 6-inch switch cases. These units provide local indication (process
driven) and 2-wire, 4-20 mA output — an ideal low-cost alternative for low
DP (at high static pressure) measurements — flow, liquid level, pressure, pressure drop,
absolute pressure, etc.

Features/Benefits

• 4-20 mA output (linear with pointer)
• Mechanical indication (easy to read)
• Remote low-battery indication
• Kit or Case assembly formats
• Output calibration jacks

Operation
The pointer movement is directly coupled to a precision potentiometer that produces an electrical signal that drives a linear 4-20 mA output.

Scales

The 6-inch diameter scale can be graduated uniformly for DP and liquid level or square root for direct reading of flow rate. Special scales are available for indicating liquid
quantity in tanks.

Enclosures

• Weather-proof — die-cast aluminum, with weatherresistant black epoxy resin paint finish. The cover lens is secured in the bezel with an elastomer ring, which acts as a seal between the bezel and the case. This ensures a moisture, fume, and dust free atmosphere for the
indicator/switch mechanism.
• Explosion-proof — certified by CSA

Read more 30 10 – 2015

Instruments 318C Indicating Switch

Model 318C Indicating Switch

The M318C DP Indicating-Switch
meets MIL-S-901C Shock Grade A
and MIL-STD-167 Vibration Specs.
Indicating pointer travels through
a 270° arc over a compact 4-1/2
inch (114 mm) dial. Scales are
calibrated in uniform increments
(DP) or liquid level. Square root gradations are available
for direct reading of flow rate. Special scales exist for fluid
quantity in tanks.
Widely used in jet engine and missile testing programs,
aircraft ground support equipment, water treatment, and
air conditioning systems, where weight and space are
critical. Also used for liquid level indication of materials,
such as: LOX, CO2, helium, nitrogen, hydrogen, and argon.
Switches
All models are available in single or dual snap-acting
mechanical contact (SPDT) switch configurations.
They can be set for high or low, or both when two
contacts are furnished.
Set points are adjustable over entire scale, using a control
screw located flush with scale; settings are indicated by
small reference scales in upper quadrants of the main scale.
• AC Rating:
• 5 amps @125V
• 2.5 amps @240V
• DC Rating:
• (Inductive) 2.5 amps @30V
• (Inductive) 0.1 amps @125V
• (Resistive) 4.0 amps @30V

Read more 30 10 – 2015

Instruments Models 288C / 289A / 290D / 291B

These Instruments DP Indicating Switches are responsive to relatively low magnitudes of pressure differences at high static pressures. They are offered in a wide range of DP ratings and can withstand over-ranges equal to their rated SWP. Typically they are used to energize alarm or control circuits.

• Stable calibration and negligible SP shift
• Minimal Maintenance
• Available in stainless steel (M289AS)

Application

M199-based 289A and 291B are used where maximum sensitivity is required in lower DP ranges, where a field change is anticipated, or when a built-in pulsation dampener is needed
to control the unit’s response time. The 289C is also available in stainless Steel (289AS).
M224C-based 288C and 290D are used in applications that require extended DP ranges (beyond M199-based units) or whenever size and weight are prime considerations.
The 288C is also available in stainless steel (288CS).

Indication/Scale
The indicating pointer travels through
a 270° arc over a six-inch (150mm)
dial. Scales are calibrated in uniform
increments for measurement of DP or
liquid level; square root available for
direct reading of flow rate; also
special scales for tank fluid quantity.
Weather-Proof Case
The weather-proof case is made of
die-cast aluminum, finished with
weather-resistant black epoxy resin
paint. The polycarbonate lens is
secured in the bezel with elastomer
ring, reducing possibility of breakage
and acts as a seal between bezel and
case for a moisture-, fume-, and dustfree
atmosphere for the indicating
mechanism.

Explosion-Proof Case
NEMA 4 case has a large cover for
maximum readability; switches/adj
accessible with cover removed. Case
is certified for Class I, Div. 1, Group B
Explosion-proof service.

Indicating Mechanism
A precision made, jeweled, rotary
movement employs a thermally stable
Ni-Span-C hair spring. Zero/range adj.
via micrometer screws. Zero adj.
accessible without removing
scaleplate or pointer. The rotary
movement/pointer are fully protected
from over-range in either direction.

Switches
All models are available in single or
dual snap-acting mechanical contact
(SPDT) switch configurations. They
can be set for high or low, or both
when two contacts are furnished. The
switches are adjustable from 5% to
95% of full scale range. Switch set
points are adjusted with a control
screw located flush with the scale;
contact setting indicated by a small
scale on scaleplate. Switch contacts
can be set to either open or close
with increasing or decreasing DP
(reverse action by reversing lead wires
at terminal block).
• AC Rating:
• 5 amps 125V
• 2.5 amps 126V-250V
• DC Rating:
• (Inductive) 1.0 amps 30V
• (Resistive) 3.0 amps 30V
Switch connections are 1/2″ NPT
Female or an optional flexible conduit
(up to 8 feet in length).

Read more 30 10 – 2015

Instruments 350, 351, 352 and 350 Sealed Sensor

Model 350 Sealed Sensor

The M350 consists of a M224C DPU with a 1-inch pipe nipple rear-welded to the DPU. The nipple is 8 inches long and can be attached directly to a pressure tap at the bottom of a tank. An optional flange, welded to the nipple, is available as an alternative tank fitting. If a
reference leg is needed, it may be field-installed.

Models 351 and 352 Sealed Sensors

The M351 features a single sealed sensor; the M352 has two sensors. Both models are available with threaded, welded, or flanged mounting connections that do not require internal vessel plumbing. These sensors are compact and lightweight — supported by their own piping connections. In most cases, this eliminates bulky pedestals or special installations. In addition, commercial raised-faced or socket-weld type flanges may be adapted to the system, if required.

Model 305 Sealed Sensor

The M305 consists of a single sensor for vented tanks or open-channel applications. A dual-sensor system is used for pressurized tanks. The M305 is designed primarily for in-tank mounting.

Read more 30 10 – 2015

DP Cone Meter

Instruments launched in 2006 an accurate, repeatable and cost optimized measurement solution for a wide range of industrial applications.  is a breakthrough product of Instruments. The inherent design of the Instruments DP Cone meter dramatically reduces required “real estate” and therefore offers a compact, rugged and low cost alternative to traditional measurement technologies. Read more 28 8 – 2015

Turbine Meters

The first turbine meters were developed in 1957 by ™. They were rugged and field-proven. This product line of has grown and developed alongside the requirements of the international oil & gas and process control industries. turbine meters of have an excellent reputation. They can handle severe environmental punishment and still maintain operational and measurement integrity.
 
Turbine Meters          

ITT 7000 Series Liquid Turbine Meters and ITT 7400 Series Gas Turbine Meters

Suitable for liquids and gases
High accuracy
Wide rangeability
Low maintenance

Liquid Turbine Meters

1000 Series TIM Liquid Turbine Meter and 1502 WECO Union Liquid Turbine Meter

Accurate and repeatable measurement
Long service life even in severe applications
Easy installation

Gas Turbine Meters

Single meter handles wide range of flow rates
Carbide bearing design
Low Intertia rotor design
Low Two-bladed rotor
Low Electrical output signal
Read more 28 8 – 2015

Transmitters

has a long history of building electronic transmitters. uses a comprehensive range of sensor technologies. They offer five series of products to satisfy world-class measurement performance; Product Series FCX, 3900 series, MVX-II, Scanner 2000 and the nuclear series.

FUJI FCX AIII Series Transmitters    

Capacitance-based sensor technology
Models to measure the high and low extremes of pressure
+/- 0.065% of span measurement accuracy
+/- 0.01% of URL stability for 10 years
Fully configurable by optional integral display
Free HART based PC interface software
Offered by only in North & South America

3900 Temperature Transmitters

3920 Series Temperature Transmitter
3940 Series Temperature Transmitter with HART Communications
Series 20 Resistance Temperature Detectors (RTD)

™ MVX-II Multi-Variable Transmitter

3095FB™ Modbus™ register map
RS485 serial communications
+/-0.05% of URL measurement accuracy

Scanner 2000    

Transmitter functions with or without flow computing
+/-0.05% of URL measurement accuracy
DP full scale 30″ to 840″ W.C.
AP Full scale 100 PSI to 5300 PSI
Optional PID local control
Optional USB PC interface
Free PC interface software

Nuclear Grade Transmitters

Proven validated designs
Comprehensive industry qualifications
Read more

Categories

Information

Controls Flow Valves Gas Oil Repair Maintenance Combustion Actuators Burner Overhaul Contact